In the process of using inspection machines, various faults may occur due to factors such as long-term operation, improper operation and environmental factors, which affect the normal production. Shanghai J&V Technologies Co., Ltd. combines its rich experience in product research and development and after-sales service to share common faults and troubleshooting methods of inspection machines. Common faults of inspection machines include inaccurate inspection, machine jamming, and system crashes. For the problem of inaccurate inspection, it may be caused by dirty lenses, improper light source adjustment or parameter setting errors. The solution is to clean the lenses regularly, adjust the light source brightness and angle appropriately, and recheck and adjust the inspection parameters according to the material characteristics. For machine jamming, it is usually due to the material deviation, excessive tension or foreign objects entering the machine. The solution is to stop the machine immediately, check and correct the material position, adjust the tension, and remove the foreign objects in the machine.

 For system crashes, it may be caused by software failures or virus infections. The solution is to restart the machine first, and if the problem persists, restore the system to the default settings or contact the technical personnel of the company for maintenance. In addition, J&V Technologies reminds customers that regular maintenance and maintenance of the inspection machine is an important measure to reduce faults. The company provides professional after-sales service and maintenance guidance to help customers solve various problems in the use of the machine.